Job Search
Results Found:
16
Structural Steel Detailer
Category: Engineering/Design
We are hiring a Structural Steel Detailer. Go to our website to apply and for more information.
Apply Now at https://apply.davissteelservices.com/nondriver/
Press Brake Operator Helper
Category: Machinist
Job Summary:
The Press Brake Operator will use a press brake to bend, shape, and manipulate sheet metal and metal plates.
Supervisory Responsibilities:
None.
Duties/Responsibilities:
The Press Brake Operator-Helper will assist the Lead Operator as listed below.
Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal
plates.
Prepares, sets up, and adjusts press brake as required by product plans and production schedules.
Ensures that there are
...read more
Press Brake Operator
Category: Machinist
Job Summary:
The Press Brake Operator will use a press brake to bend, shape, and manipulate sheet metal and metal plates.
Supervisory Responsibilities:
None.
Duties/Responsibilities:
Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal
plates.
Prepares, sets up, and adjusts press brake as required by product plans and production schedules.
Ensures that there are sufficient raw materials available.
Measures and aligns materials to be used.
Inspects
...read more
Laser Operator
Category: Machinist
We are hiring a Laser Operator. The job requirements are:
Duties and Responsibilities:
1 year experience as a main operator.
Perform setups and operations on Amada and Cincinnati Lasers.
Check material thickness for accuracy and load material.
De-nest and remove laser oxide from parts.
With training perform all assigned laser operations.
Detects and reports any defective product being produced or already produced.
Follows all safety procedures while reporting any possible safety issues to the
...read more
Band Saw Operator
Category: Machinist
Minimum 1 year experience
Must be able to operate all types of production saws cutting metal.
Must be able to physically pull orders. – Up to 100#. (most lifting is done with a forklift).
Experience working with steel is a big plus.
Must be able to read a chart to convert decimals to fractions, and fractions to decimals (VERY IMPORTANT).
Ability to read a tape measure down to the 16th and ability to read a Micrometer Accuracy is extremely important so there is minimal waste from cutting.
Must be
...read more
Press Brake Operator Helper
Category: Machinist
Job Summary:
The Press Brake Operator will use a press brake to bend, shape, and manipulate sheet metal and metal plates.
Supervisory Responsibilities:
None.
Duties/Responsibilities:
The Press Brake Operator-Helper will assist the Lead Operator as listed below.
Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal
plates.
Prepares, sets up, and adjusts press brake as required by product plans and production schedules.
Ensures that there are
...read more
Press Brake Operator
Category: Machinist
Job Summary:
The Press Brake Operator will use a press brake to bend, shape, and manipulate sheet metal and metal plates.
Supervisory Responsibilities:
None.
Duties/Responsibilities:
Operates a press brake to manufacture tools, equipment, and other components from sheet metal or metal
plates.
Prepares, sets up, and adjusts press brake as required by product plans and production schedules.
Ensures that there are sufficient raw materials available.
Measures and aligns materials to be used.
Inspects
...read more
Laser Operator
Category: Machinist
We are hiring a Laser Operator. The job requirements are:
Duties and Responsibilities:
1 year experience as a main operator.
Perform setups and operations on Amada and Cincinnati Lasers.
Check material thickness for accuracy and load material.
De-nest and remove laser oxide from parts.
With training perform all assigned laser operations.
Detects and reports any defective product being produced or already produced.
Follows all safety procedures while reporting any possible safety issues to the
...read more
Band Saw Operator
Category: Machinist
Minimum 1 year experience
Must be able to operate all types of production saws cutting metal.
Must be able to physically pull orders. – Up to 100#. (most lifting is done with a forklift).
Experience working with steel is a big plus.
Must be able to read a chart to convert decimals to fractions, and fractions to decimals (VERY IMPORTANT).
Ability to read a tape measure down to the 16th and ability to read a Micrometer Accuracy is extremely important so there is minimal waste from cutting.
Must be
...read more
Warehouse Workers
Category: Transportation and Warehousing
We are hiring Warehouse Workers for 1st and 2nd shift. The job requirements are:
Experience working with steel is a big plus.
Must be able to physically pull orders. – Up to 50 lbs. Most of it is pulling/pushing rather
than lifting. (Most lifting is done using a forklift and Crane)
Must be able to read a chart to convert decimals to fractions, and fractions to decimals
(VERY IMPORTANT).
Ability to read a tape measure down to the 16th & Micrometer
Must be able, or willing to learn, to operate a
...read more
Shear Operator Helper
Category: Transportation and Warehousing
A Shear Operator Helper’s job is to assist the Shear Operator in any and all of the
following job requirements:
Cut jobs for that day as per the schedule,
Check material with drawings to make sure it matches, check quantity of
parts then run material.
Ability to read a tape measure & Micrometer. Accuracy is extremely important
so there is minimal waste from cutting.
Crane experience is very helpful.
Forklift experience is very helpful.
Non-Smoking Premises
Non air-conditioned building
The
...read more
Shear Operator
Category: Transportation and Warehousing
A Shear operator’s job is to cut jobs for that day as per the schedule,
Check material with drawing to make sure it matches, check quantity of parts then run material.
Sizes of material vary from 18ga to ½ plate. Sheet sizes and plate sizes vary from 48”x96” up to 96” to 240”. The weight of materials range from 20 lbs. up to 960 lbs.
Ability to read a tape measure & Micrometer. Accuracy is extremely important so there is minimal waste from cutting.
Crane experience very helpful.
Some Forklift
...read more
Non-CDL Driver (Warehouse Worker)
Category: Transportation and Warehousing
We are hiring a Non-CDL Driver (Warehouse Worker). The job requirements are:
DRIVER-Experience
Class A CDL a huge plus, but not required
Must be over age 26 and should have experience driving Bobtail
and Gooseneck with 30’ Trailer
Ability to back up 30’ trailers into the Warehouse
Knowledge of how to tie down a metal load.
Most driving routes will be in the Waco area but may also drive to
surrounding towns as well.
Clear driving record
Non-Smoker
Recent drug and alcohol test, along with
...read more
Forklift Operator
Category: Transportation and Warehousing
We are hiring a Forklift Operator. Go to our website for a job application.Apply Now at https://metals2go.com/apply-nondriver/
Shear Operator Helper
Category: Transportation and Warehousing
A Shear Operator Helper’s job is to assist the Shear Operator in any and all of the
following job requirements:
Cut jobs for that day as per the schedule,
Check material with drawings to make sure it matches, check quantity of
parts then run material.
Ability to read a tape measure & Micrometer. Accuracy is extremely important
so there is minimal waste from cutting.
Crane experience is very helpful.
Forklift experience is very helpful.
Non-Smoking Premises
Non air-conditioned building
The
...read more
Shear Operator
Category: Transportation and Warehousing
A Shear operator’s job is to cut jobs for that day as per the schedule,
Check material with drawing to make sure it matches, check quantity of parts then run material.
Sizes of material vary from 18ga to ½ plate. Sheet sizes and plate sizes vary from 48”x96” up to 96” to 240”. The weight of materials range from 20 lbs. up to 960 lbs.
Ability to read a tape measure & Micrometer. Accuracy is extremely important so there is minimal waste from cutting.
Crane experience very helpful.
Some Forklift
...read more